Lost The Password? How To Reset Your Router

If you have lost or forgotten the User name and password, and cannot get in to your router’s control panel (or wireless access point) here are the steps you should follow to regain access, and control over your network settings.

1) If you do not know it already, determine the Make and Model of your router. This will often be found on a label on the bottom.
(“Make” is the manufacturer: Belkin, Netgear, Lynksys, D-link, for example; and the “model” will the “DIR 655”, or “WRT-54G” [your letters/numbers will vary].)

2) Use your favorite search engine and look up your router’s defaults – and write them down.
In the search pane, type the make, then the model, then “defaults” (D-link DIR 655 defaults, for example). From the list of results, look for the one that is the manufacturer’s Support page. Write down the:

• IP address (this will be something like “192.168.1.1”)
• Username
• Password

[note: if all you need is the User+Pwd, you can also go to http://www.routerpasswords.com/]

3) Open your web browser (Internet Explorer/Firefox/Chrome)
Type the default IP address you just looked up into the browser’s address bar (where the http://www.website.com goes) and press “Enter”.
This will open the router Control Panel login.

4) Try the default Username/Password (Often, this is “Admin” and the password is blank [empty].)

No luck?

5) Reset the router

IMPORTANT Note: resetting the router wipes away any changes you had made — and your connection settings to your ISP. You will have to create new user names and passwords and “wireless security keys” (WEP, WPA, WPA2) and reconnect to the Internet/ISP. (Which means you will have to reconnect each of your wireless devices by entering your new “key”.)

On the back of the router, look for a small button, or hole, labeled “Reset”.

• With the unit on, use a straightend paperclip to press the reset down for about 15 seconds, and then release it.
• The unit will restart on its own.
As soon as the lights stop blinking, the unit is ready.

Now repeat Steps 3 and 4, and this time you will be in, and you will have access to the router’s settings control panel.

Related:

• How to secure your wireless network
• How To Connect a Router Without the Setup CD
• Restricting Roommates Internet Use – Continued.
• A New Wireless Router “Internet security made me decide to buy a new router...”

Today’s quote: “Fall seven times, stand up eight.” ~ Japanese Proverb

Copyright 2007-2011 © “Tech Paul” (Paul Eckstrom). All Rights Reserved.

---

>> Folks, don’t miss an article! To get Tech – for Everyone articles delivered to your e-mail Inbox, click here, or to subscribe in your RSS reader, click here. <<

---

Lost the Setup CD? How To Connect a Router*

Reader asks how to connect to the Internet without the original CD

Q: “How can I connect to the Internet with my laptop via D-link router from desktop? We have no CD ROM for d link.”

A: You do not need the setup CD to make a router work (frankly, the following is my preferred method, as the CD’s usually install unnecessary “bonus features”.) Here is how you establish Internet connections (aka “configure a”) on a router.

1) Assign your PC an IP address in the same range as the router’s default address– for most routers, assign the IP 192.168.1.2, but since this is a D-Link router, use 192.168.0.2.
(Look to “Assign Address” here for Illustrated instructions.)

2) Connect the PC directly to the router with an Ethernet cable.

3) open a web browser (IE, Firefox, Safari) and enter the IP address number of the router into the address bar. (If you don’t know this, look to the router manufacturer’s Website for “default settings”). Typically, this is 192.168.1.1, or 192.168.0.254 — but D-Link uses 192.168.0.1.

4) Enter the default Name and Password (again, look to to the website’s support page/FAQ’s if you don’t know these). But typically these are “admin”+”admin”, or “admin”+”password”.
D-Link’s default is admin/admin.

Your are now in your router’s “web interface” Control Panel, and you can enter the PPPoE setting provided by your ISP. Typically all you need is an identifier.. which is an e-mail address + password.
If you can’t find or remember these, contact your ISP’s support. D-Link’s Wizard will help.

[note: Once your ISP has connected, and while you’re in the Control Panel, set your router’s security configuration, and set a new password (and write them down). Illustrated instructions can be found here, https://techpaul.wordpress.com/2008/01/01/how-to-secure-your-wireless-network/]

5) Return to Network Connections (from Step 1) and reset your PC to “Get address automatically–DHCP”. Reboot your PC if necessary.

Today’s free download: Return to Castle Wolfenstein: Enemy Territory. (Full Install.) Wolfenstein Enemy Territory is a stand-alone multiplayer game in which players wage war as Axis or Allies in team-based combat. In Wolfenstein Enemy Territory Axis and Allied teams do battle in traditional single scenarios, or wage war through a series of linked scenarios in a totally new campaign mode. During combat players gain experience and skill, and through battlefield promotions are awarded additional abilities that remain persistent across an entire campaign.

Today’s free link(s):
* Ginipic – Taking image searching to a whole new level…
* Inventive FaceBook Scammers Trick You Out of Money with Trojans

* Orig post: 10/13/2008. For some reason, this has been getting a lot of ‘hits’ this week…

Copyright 2007-9 © Tech Paul. All rights reserved. post to jaanix

Share this post :

Protect Yourself With a Router

Increase the security of your Internet connection for less than $50.

For those of you using a DSL or cable connection to surf the Web, you should be aware that your connection is “always on”. That means your computer is able to go online and get security updates and other useful items without your being present, or even aware of the activity.

This is a mixed blessing, as it can also do other–less wonderful–things without your knowledge. You can increase your Web security by preventing being visible to miscreants out there on the Web by hiding your computer’s IP address (a set of unique numbers used to locate and identify machines on the Internet) behind a router which is capable of “NAT” (some manufactures call this “with firewall”) — as almost all current makes and models are — such as those sold by Linksys, Netgear, and D-Link. You can research models on the Web, and then find the best prices on such shopping sites as www.buy.com and Shopzilla.
I have seen Wireless-G routers for $20.

If your router allows for MAC address filtering, turn it on! Use a browser to log onto the router’s administrator’s control panel as per its instruction booklet (often it’s http://192.168.1.1) and click on “enable MAC filtering”. This will prevent other computers from getting a free ride by accessing your network and your Internet connection.

(If you have never logged onto your router and set a password, and your manual is lost forever, instructions can be found at the manufacturer’s website.)

Putting a router between your modem and computer will also allow you to share your Web connection with multiple computers. Most routers have Ethernet ports for four of your computers.

Note: If you purchase a router that includes a wireless access point, there are some measures you should take to secure the wireless transmitter/receiver as well. First, turn on and configure encryption of at least WPA as per the instruction booklet, and 2nd, disable the SSID broadcast. These two steps will prevent intruders from “seeing” your access point, and encryption will strongly discourage a snoop from capturing and reading your traffic.

To read my instruction article covering the security enabling steps (including illustrations), please click here. Doing so will put a shield between you (your computers) and the bad guys out there on the Internet, and increase your privacy and security.

* For those of you who don’t already have a router/WAP, or are just thinking about getting a newer, faster, one, you may also want to look at Wireless standards and you–buying a new WAP.

Copyright 2007-8 © Tech Paul. All rights reserved. post to jaanix

Share this post :

The first Tech Paul Post: secure your web connection

I want to start by welcoming all you readers to this shiny new blog–and invite you to take a peek at the About page.

This blog is different from other technically oriented blogs in that it is NOT a tech-news page, nor a place for me to drop names, nor is it an ego-site. The purpose of this blog is to answer questions about the day-to-day usage of PC’s, offer advice for getting full use out of your system, and offer insights into how today’s  tech really works. You can post questions here (in the comment box) and get answers, too. Whether you’re a “techie”, or a novice, it is my hope that you will find the information presented here to be usefull and helpfull.

Tip of the day: In this area I will place a tip, hint, shortcut, “tweak”, or how-to. It will depend on your previous experience using computers (and other gadgets and gizmos) whether or not you already know the topic. I will try my best not to confuse and alienate those of you who actually have a life outside of computing, while not boring and/or insulting the technically inclined.

Increase the security of your Internet connection for less than $50. For those of you using a DSL or cable connection to surf the Web, you should be aware that your connection is “always on”. That means your computer is able to go online and get security updates and other useful items without your being present, or even aware of the activity. This is a mixed blessing, as it can also do other–less wonderful–things without your knowledge. Prevent being visible to miscreants out there on the Web by hiding your computer’s IP address (a set of unique numbers used to locate and identify machines on the Internet) behind a router which is capable of NAT–as almost all current makes and models are–such as those sold by Linksys, Netgear, and D-Link. You can research models on the Web, and then find the best prices on such shopping sites as www.buy.com and Shopzilla. If your router allows for MAC address filtering, turn it on! Use a browser to log onto the router’s administrator’s control panel as per its instuction booklet (often it’s http://192.168.1.1) and click on “enable MAC filtering”. This will prevent other computers from using your network and your Internet connection. If you have never logged onto your router and set a password, and your manual is lost forever, instructions can be found at the manufacturer’s website. Putting a router between your modem and computer will also allow you to share your Web connection with multiple computers. Most routers have Ethernet ports for four of your computers.

***Note***If you purchase a router that includes a wireless access point, there are some measures you should take to secure the wireless transmitter/receiver as well. First, turn on and configure encryption of at least WPA as per the instruction booklet, and 2) disable the SSID broadcast. These two steps will prevent intruders from “seeing” your access point, and encryption will prevent a snoop from capturing and reading your traffic.

MY GUARANTY TO YOU: I am a fanatic of getting stuff for free, and the Internet has a wealth of free-for-the-download resources. I will frequently post links to free stuff for you to take advantage of yourselves. But! I will only post links to software that is free from spyware, and to websites that ARE NOT BOOBYTRAPPED. I will endeavour to post a new link at the bottom of each new posting.

Today’s free link: Game Give Away Of The Day–this website offers a different free game each day. These games range from children’s games to fairly intense 3-D action games. These are complete games, and not just small “demo” versions. I visit this site every day to see what’s being offered, and have already downloaded quite a few fun timewasters. Here’s their blurb:

 

Copyright © 2007 Tech Paul. All rights reserved.

 

Share this post :