Wired or Wireless?*

This networking question was submitted by a reader recently.

Q: Paul, I am hoping for some guidance. I will soon be moving, and will have to set up a new network. I have three computers, a laser jet printer and a photo printer. My old network was wired and worked well, but I have heard that the new wireless is faster.

Which is better these days, wired or wireless?

A: I hate ambiguous answers, but in this situation I really must answer, “that depends”. And I must also say that it really isn’t a case of one being “better” than the other.
In my experience, a “blended” network (both wired and wireless) is the most common.

Consideration #1: Mega-bits-per-second:
1) Wire “speed” is typically either 10/100, or 1,000(Gigabit).
2) Wireless “speed” is either 54 (g) or 270 (n).
… and your Internet is coming into your home at.. 1.5? 3? 6 Mbps?
(My point here is that, as far as sharing your Internet is concerned, even a very old 10 Mbps network is “fast” enough.)

Consideration #2: Stringing cable:
Most newer homes are built with Ethernet wiring, and so your network is already there (to a large degree), but for older homes a very real concern — should you choose to go Gigabit wired — is where will the wires go? How will you get them upstairs?

This is not an insurmountable issue (and, you could hire a professional) but it may be that wireless is the best for you.

General advice:
* Networking gear defaults to the speed of the slowest component.
What that means is, let’s say you go and buy a brand-new Wireless -N router (technically, a “WAP”) that runs at 270 Mbps, and the wireless adaptor on your 2 year-old laptop is a “G”, your connection will be at 54 Mbps – the G speed.
And if the port on your Desktop is Gigabit, and your cable is Cat 5e or better (Gigabit capable), but there’s no Gigabit port on your router.. your LAN can only run at 100 Mbps.

The trick is to make sure everything ‘matches’. For instance, in the first example (laptop), buying a Wireless-N PCMCIA card, or USB dongle, will now give you the 270 you bought the fast router for. And for the Gigabit example, a new router that has Gigabit ports will make things ‘match’ and give you a Gigabit LAN.

Last bit of advice: Buy the fastest gear you can afford. You may not get full advantage of it today, but it won’t be a bottleneck tomorrow.

Today’s free link: In today’s article I mentioned that there are alternatives to drilling holes in your wall/floor/ceiling, and one method is EoP (Ethernet over Power lines). This uses the electrical wires already in your home to send your 1’s and 0’s from device to device. Fellow Tech Blogger Bill Mullins has a very informative article on this topic, here — http://billmullins.wordpress.com/2009/03/07/your-electric-wiring-is-a-wi-fi-network-alternative/

* Orig post 11/16/08

Copyright 2007-9 © Tech Paul. All rights reserved. post to jaanix

Share this post :