Another Way To Install A Program On A Netbook

A Thumb Drive Can Be Used In Place Of An External Optical Drive

Light-weight and small size make netbooks very portable. But, to achieve their compact size, certain items are missing from netbooks — most notably perhaps, internal CD/DVD drives.

This “disc deficit” is usually overcome by the purchase of an external (USB cable-connected) optical drive.

Today I want to point out that should you not happen to have an external drive available, frequently you can substitute, and use a “thumb drive” (“memory stick”) instead.. such as using the following method to watch DVD movies — see, Tech Tip for Travelers – Make Your Movies More Portable!

Tip of the day: Use a thumb drive to install programs on to a netbook.
To install a program (you have a CD for) onto a netbook using a thumb drive, you will need two things; one, access to a computer that has a CD/DVD drive and; two, a thumb drive large enough to hold the contents of the Install disc. [note: CD’s are roughly 700 MB’s (.7 GB’s) and DVD’s are typically 4.7 GB’s]

1) Go to the PC with the optical drive and insert the thumb drive. Then insert the Install disc into the drive tray.
Cancel (stop) any setup/install process from starting, should it try to “autostart”.

2) If the AutoPlay window opens, select “Open folder to view files” (which should be the bottom choice).
If you have disabled AutoPlay: Click Start > Double-click Computer (My Computer in XP/older) > right-click on the optical drive (CD-ROM) and choose Explore.

3) Drag the entire contents (all the files) of the CD/DVD to the icon for “removable drive” that is the thumb drive. Take mental note of what the installer executable’s name is – typically, it is setup.exe.

4) Use “Safely remove” and remove the thumb drive, and then insert it into your netbook. If the AutoPlay window opens, select “Open folder to view files” (which should be the bottom choice), if you have disabled AutoPlay: Click Start > Double-click Computer (My Computer in XP/older) > right-click on the removable drive (your thumb drive) and choose Explore. Find and then double-click the setup.exe.

That will “launch” the set up process and install the program on to your netbook, just as if it had been run from a disc.

Bonus tip: When you’re all done, you can drag all those setup files to the Recycle bin.

Copyright 2007-2010 © Tech Paul. All rights reserved. post to jaanix

Share this post :

How To Connect a Router Without the Setup CD*

Reader asks how to connect to the Internet without the original CD

Q: “How can I connect to the Internet with my laptop via D-link router from desktop? We have no CD ROM for d link.”

A: You do not need the setup CD to make a router work (frankly, the following is my preferred method, as the CD’s usually install unnecessary “bonus features”.) Here is how you establish Internet connections on a (aka “configure a”) router… and I will use a D-Link as my example, but they all work basically the same.

1) Assign your PC an IP address in the same range as the router’s default address– for most routers, assign the IP of 192.168.1.2, but since this is a D-Link router, use 192.168.0.2. (Look to to the router manufacturer’s website’s support page/FAQ’s if you don’t know this.)
[See “Assign Address” here for Illustrated instructions.]

2) Connect the PC directly to the router with an Ethernet cable.

3) open a web browser (IE, Firefox, Safari) and enter http:// and then the IP address number of the router into the address bar. (If you don’t know this, look to the router manufacturer’s Website for “default settings”). Typically, this is 192.168.1.1, or 192.168.0.254 — but D-Link uses http://192.168.0.1.

4) Enter the default Name and Password (again, look to to the router manufacturer’s website’s support page/FAQ’s if you don’t know these). But typically these are “admin”+”admin”, or “admin”+”password”.
D-Link’s default is admin/admin.

Your are now in your router’s “web interface” Control Panel, and you can enter the PPPoE setting provided by your ISP. Typically all you need is an identifier.. which is an e-mail address + password.
If you can’t find or remember these, contact your ISP’s support. D-Link’s Wizard will help.

[note: Once your ISP has connected, and while you’re in the Control Panel, set your router’s security configuration, and set a new password (and write them down). Illustrated instructions can be found here, https://techpaul.wordpress.com/2008/01/01/how-to-secure-your-wireless-network/]

5) Return to your PC’s Network Connections (from Step 1) and reset your PC to “Get address automatically–DHCP”. Reboot your PC if necessary.

Today’s free download: Return to Castle Wolfenstein: Enemy Territory. (Full Install.) Wolfenstein Enemy Territory is a stand-alone multiplayer game in which players wage war as Axis or Allies in team-based combat. In Wolfenstein Enemy Territory Axis and Allied teams do battle in traditional single scenarios, or wage war through a series of linked scenarios in a totally new campaign mode. During combat players gain experience and skill, and through battlefield promotions are awarded additional abilities that remain persistent across an entire campaign.

Today’s free link(s):
* Ginipic – Taking image searching to a whole new level…
* Inventive FaceBook Scammers Trick You Out of Money with Trojans

* Orig post: 10/13/2008. For some reason, this has been getting a lot of ‘hits’ this week…

Copyright 2007-9 © Tech Paul. All rights reserved. post to jaanix

Share this post :